Kyocera ECOSYS M6526cdn ECOSYS M6026cdn/M6526cdn/Type B Operation Guide - Page 437
TCP/IP (IPv4) Setup, LAN Interface, 10Base-Half, Sys. Menu/Count., Report, Counter, Exit ]
View all Kyocera ECOSYS M6526cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 437 highlights
Default Setting (System Menu) LAN Interface: a b *1 **A*u*t*o 2 10Base-Half 3 10Base-Full 5 Press the or key to select [LAN Interface]. 6 Press the OK key. LAN Interface appears. 7 Press the or key to select the desired LAN interface. The available LAN interfaces are as follows: Auto 10Base-Half 10Base-Full 100Base-Half 100Base-Full 1000Base-T 8 Press the OK key. Completed. is displayed and the 8 screen returns to the Network Setting menu. TCP/IP (IPv4) Setup Set up TCP/IP to connect to the Windows network. Refer to Network Setup (LAN Cable Connection) on page 2-15 about the procedures. TCP/IP (IPv6) Setup Set up TCP/IP (IPv6) to connect to the network. The default setting is Off. Use the procedure below to setup the TCP/IP (IPv6) setting. Sys. Menu/Count.:a b 1 Report 2 Counter *3 **S*y*s*t*e*m*/*N*e*t*w*o*r*k***** [ Exit ] 1 In the Sys. Menu/Count. menu, press the or key to select [System/Network], and press the OK key. Login User Name: L b Login Password: [ Login ] When you are performing user management and have not logged in, a login screen will appear. Then, enter the Login User Name and Login Password to log in, and press [Login] (the Right Select key). 8-175