Kyocera ECOSYS M6526cdn ECOSYS M6026cdn/M6526cdn/Type B Operation Guide - Page 454

Default Setting (System Menu) 9 Press the  or  key to select [Off], [SSL/TLS] or [STARTTLS]. 10 Press the OK key. Completed. is displayed and the screen returns to the Secure Protocol menu. POP3 Security 1 (2, 3) Select the communication protocol according to the type of security employed by the POP3 server. The default setting is Off. The table below shows the available settings. Item Off SSL/TLS STARTTLS Description Do not use security employed by the POP3 server. Encryption is applied any data communication. To enable POP3 security, the POP3 port may have to be changed according to the server settings. Typically, 995* for SSL/TLS is well-known POP3 port. Encryption is applied any data communication. Typically, 110* for STARTTLS is well-known POP3 port. * You can change the port number using Command Center RX. Use the procedure below to make the setting. Sys. Menu/Count.:a b 1 Report 2 Counter *3 **S*y*s*t*e*m*/*N*e*t*w*o*r*k***** [ Exit ] 1 In the Sys. Menu/Count. menu, press the  or  key to select [System/Network], and press the OK key. Login User Name: L b Login Password: [ Login ] When you are performing user management and have not logged in, a login screen will appear. Then, enter the Login User Name and Login Password to log in, and press [Login] (the Right Select key). System/Network: a b *1**N*e*t*w*o*r*k**S*e*t*t*i*n*g**** 2 Optional Network 3 NW InterfaceSend [ Exit ] 2 The System/Network menu appears. 3 Press the  or  key to select [Network Setting]. 8-192