Kyocera ECOSYS M6526cdn ECOSYS M6026cdn/M6526cdn/Type B Operation Guide - Page 482
Toner Container Replacement, Maintenance, Add toner
View all Kyocera ECOSYS M6526cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 482 highlights
Maintenance Toner Container Replacement When the message display displays Add toner, replace the toner. Every time you replace the toner container, be sure to clean the parts as instructed below. For details, refer to Cleaning the paper transfer unit on page 9-3. CAUTION: Do not attempt to incinerate the toner container or the waste toner box. Dangerous sparks may cause burns. Toner Container Replacement 1 While pulling the top cover lever, open the top tray. CAUTION: To prevent toppling, the top tray and document processor cannot be opened at the same time. Open the top tray to the position shown. If the tray is not opened to this position, it will not be possible to install the toner container. 2 Carefully remove the old toner container from the machine. NOTE: Put the old toner container in the plastic bag (supplied with the new toner kit) and discard it later according to the local code or regulations for waste disposal. 3 Take the new toner container out of the toner kit. Shake the new toner container at least 5 or 6 times as shown in the figure in order to distribute the toner evenly inside the container. 9-4