Kyocera KM-6030 6030/8030 Operation Guide (Basic Edition) Rev-4 - Page 40
Ensure that the loaded paper does not exceed
View all Kyocera KM-6030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Preparing to Copy 3 Holding the paper width adjusting tab, move the paper width guide to fit the paper. NOTE: Paper sizes are marked on the cassette. To switch between inch and metric paper sizes, slide the size adjustment switch. A 1 Holding the paper width adjustment tab, move the paper width guide to anywhere that the paper size scale is not indicated. 2 Rotate the size adjustment switch (A) 90 degrees, horizontal to vertical. B 3 Slide the size adjustment lever (B) to upper (C) or lower (I) position. I: Inches C: Metrics 4 Rotate the size adjustment switch 90 degrees, vertical to horizontal. 4 Align the paper flush against the right side of the cassette as you load it. IMPORTANT: Be sure that the paper length and width guides rest securely against the paper. If there is a gap, readjust the guides to fit the paper. The gap may cause a paper jam. Before loading the paper, be sure that it is not curled or folded. Paper that is curled or folded may cause paper jams. Ensure that the loaded paper does not exceed the level indicated. Paper that exceeds the level indicated may cause a paper jam. 2-4