Kyocera KM-6030 6030/8030 Operation Guide (Basic Edition) Rev-4 - Page 61
Adjusting Exposure
View all Kyocera KM-6030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Basic Operation Adjusting Exposure Adjust the exposure automatically or manually. [Manual] is selected as the default setting mode. When selecting [Manual], follow the steps as below. 1 Place the originals in the document processor or on the platen. 2 Press the exposure adjustment key ( / ) to adjust the exposure level. To use the automatic exposure mode, press [Auto]. The copier determines a suitable exposure level for copying. To change the exposure mode from [Auto] to [Manual], press the exposure adjustment key ( / ). Ready to copy. 11x8½" Plain 11x8½" Recycled 11x17" Plain 8½x11" Plain Basic APS MP tray Plain 11x8½" Plain User choice Auto % 100% Reduce /Enlarge Function Auto Exposure Exposure Mode Program Paper Size 11x8½ 100% Staple Off Staple Left Top Staple /Punch 3 Press the Start key to start copying. NOTE: By pressing [Exposure], the Exposure Mode screen will be displayed. You can also adjust the exposure from this screen. You can increase or decrease the exposure of the auto exposure mode. Refer to Chapter 3 of the Advanced Operation Guide. You can fix the default setting mode in the auto exposure mode. Refer to Chapter 3 of the Advanced Operation Guide. You can choose the adjustment level from 7 or 13. Refer to Chapter 3 of the Advanced Operation Guide. 3-5