LG DML200 User Manual - Page 11

GETTING STARTED The Battery The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and standby time. The battery charge level is shown at the top of the LCD screen. NOTE: It is important to fully charge the battery before initial use of the phone. Installing the Battery To install, insert the battery into the opening on the back of the phone and gently press down until the latch snaps into place. Removing the Battery 1. Make sure the power is off so that you don't lose any stored numbers or messages. 2. Press the battery release latch up and remove the battery from the phone at a 45-degree angle. 16 Charging the Battery To use the charger provided with your phone, plug the end of the adapter into the phone's charger port and the other end into an electrical outlet. The charge time varies depending upon the battery level. The maximum charge time for a fully discharged battery is 3 hours. WARNING! Use only the charger provided with the phone. Using any charger other than the one included with the DM-L200 may damage your phone or battery. Battery Charge Level The battery charge level is shown at the top right of the LCD screen. When the battery charge level becomes low, the low battery sensor alerts you in three ways: sounding an audible tone, blinking the battery icon, and displaying LOW BATTERY WARNING! If the battery charge level becomes exceedingly low, the phone automatically switches off and any function in progress is not saved. Fully Charged Fully Discharged Turning the Phone On and Off Turning the Phone On 1. Install a charged battery or connect the phone to an external power source such as a cigarette lighter charger or hands-free car kit. 2. Press for a few seconds until the LCD screen lights up. 17