Lexmark Genesis S815 Quick Reference Guide - Page 88

Fax troubleshooting, Fax troubleshooting checklist, Cannot send faxes

Get Lexmark Genesis S815 PDF manuals and user guides View all Lexmark Genesis S815 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

Fax troubleshooting • "Fax troubleshooting checklist" on page 88 • "Cannot send faxes" on page 88 • "Cannot receive faxes" on page 90 • "Cannot run the fax software" on page 91 Fax troubleshooting checklist If you encounter problems sending and receiving faxes, then check the connection first: 1 Check for a dial tone on the telephone line by plugging an analog telephone into the wall jack, DSL filter, VoIP device, or cable modem where you connected the printer. Make sure you plug the telephone into the same port. If you do not hear a dial tone, then contact your line provider. 2 While the printer is connected to the telephone line, check for a dial tone by plugging an analog telephone into the port of the printer. If you do not hear a dial tone, then use the checklist below. Listen for a dial tone after checking each item. If you hear a dial tone but still have problems sending and receiving faxes, then see the other topics in this section. Connection checklist • Make sure that the printer and other devices on the line (if applicable) are set up and configured correctly according to your setup scenario. • Make sure that the cables are connected to the correct ports. • Make sure that the cables are securely plugged in. Check the cable connections for the following hardware, if applicable: Power supply Answering machine Cable modem Splitter Telephone VoIP adapter DSL filter RJ-11 adapter • If the printer is connected to a Digital Subscriber Line, then make sure you are using a DSL filter for the printer. • If the printer is connected to a VoIP adapter or cable modem, then make sure that the printer is plugged into the first phone port. • If you are using a splitter, then make sure that you are using a phone splitter. Do not use a line splitter. Cannot send faxes If the "Fax troubleshooting checklist" does not solve the problem, then try one or more of the following: MAKE SURE TO ENTER YOUR USER INFORMATION IN THE PRINTER If you did not enter your user information during initial setup, then enter your fax name and fax number. This is the information that identifies you as the sender in all the faxes that you send. Some countries or regions require the fax number and fax name for you to send a fax, and some fax machines block anonymous faxes. Troubleshooting 88

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
Fax troubleshooting
•
“Fax troubleshooting checklist” on page 88
•
“Cannot send faxes” on page 88
•
“Cannot receive faxes” on page 90
•
“Cannot run the fax software” on page 91
Fax troubleshooting checklist
If you encounter problems sending and receiving faxes, then check the connection first:
1
Check for a dial tone on the telephone line by plugging an analog telephone into the wall jack, DSL filter, VoIP device,
or cable modem where you connected the printer. Make sure you plug the telephone into the same port.
If you do not hear a dial tone, then contact your line provider.
2
While the printer is connected to the telephone line, check for a dial tone by plugging an analog telephone into the
port of the printer.
If you do not hear a dial tone, then use the checklist below. Listen for a dial tone after checking each item.
If you hear a dial tone but still have problems sending and receiving faxes, then see the other topics in this section.
Connection checklist
•
Make sure that the printer and other devices on the line (if applicable) are set up and configured correctly according
to your setup scenario.
•
Make sure that the cables are connected to the correct ports.
•
Make sure that the cables are securely plugged in.
Check the cable connections for the following hardware, if applicable:
Power supply
Answering machine
Cable modem
Splitter
Telephone
VoIP adapter
DSL filter
RJ-11 adapter
•
If the printer is connected to a Digital Subscriber Line, then make sure you are using a DSL filter for the printer.
•
If the printer is connected to a VoIP adapter or cable modem, then make sure that the printer is plugged into the
first phone port.
•
If you are using a splitter, then make sure that you are using a phone splitter. Do
not
use a line splitter.
Cannot send faxes
If the “Fax troubleshooting checklist” does not solve the problem, then try one or more of the following:
M
AKE
SURE
TO
ENTER
YOUR
USER
INFORMATION
IN
THE
PRINTER
If you did not enter your user information during initial setup, then enter your fax name and fax number. This is the
information that identifies you as the sender in all the faxes that you send. Some countries or regions require the
fax number and fax name for you to send a fax, and some fax machines block anonymous faxes.
Troubleshooting
88