Lexmark Pro5500t User's Guide - Page 51

Copying Copying ADF 51 Scanner glass Use the ADF for multiple‑page documents. Note: The ADF is available only on select models. If you purchased a printer without an ADF, then load original documents or photos on the scanner glass. Use the scanner glass for single pages, small items (such as postcards or photos), transparencies, photo paper, or thin media (such as magazine clippings). Tips for copying • Make sure the exit bin is fully extended and the bin extender is flipped out. • Use the ADF when scanning two‑sided pages if your printer supports duplex scanning and the ADF supports the original document size. • Use the scanner glass when scanning two‑sided pages if your printer does not support duplex scanning or the ADF does not support the original document size. • When using the ADF, adjust the paper guides on the ADF to the width of the original document. • To easily retrieve a document after copying or scanning, lift the ADF input tray. • When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned image. • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass. • When the document to be copied is in place with the settings you want, press to start copying. Making copies 1 Load the original document. Note: From the home screen, you can press to print one copy of the original document using the default settings. 2 From the home screen, navigate to: Copy > More Options > Number of Copies 3 Enter the number of copies you want to print, and then touch Accept.