Lexmark W810n Setup Guide (2.8 MB) - Page 118
Set up the optional finisher, click, Move to the front of the printer.
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Crossshaped button Bracket Tabs 7 Move to the side of the finisher opposite the printer. 8 Squeezing the green tabs, lift the guide rail up into the bracket on the bottom of the finisher. The green cross-shaped buttons on the sides of the guide rail click into the holes on the bracket. 9 Move to the front of the printer. 10 Insert the free end of the guide rail into the bracket on the 2500-sheet drawer. 106 Set up the optional finisher
106
Set up the optional finisher
7
Move to the side of the finisher
opposite the printer.
8
Squeezing the green tabs, lift
the guide rail up into the
bracket on the bottom of the
finisher.
The green cross-shaped buttons
on the sides of the guide rail
click
into the holes on the bracket.
9
Move to the front of the printer.
10
Insert the free end of the guide
rail into the bracket on the
2500-sheet drawer.
Cross-
shaped
button
Bracket
Tabs