Lexmark W810n Setup Guide (2.8 MB) - Page 172
Point-to-point printing LexIP, Set up network addresses, Drivers, MarkVision and Util, ities
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Note: For details on installing the necessary software, launch the Drivers, MarkVision and Utilities CD. Click View Documentation and then click MarkNet Print Servers. 3 Select TCP/IP. 4 Install the TCP/IP software component on the server that contains the print queue. This software is necessary to establish the link between the MarkNet print server and the queue. 5 Set up a print queue on the server by creating a printer object: a Click Start, Settings, Printers, Add Printer. a When prompted, select My Computer (not Network Printer Server). b Click Add Port. c Select Lexmark Network Port, and then click New Port. Fol- low the instructions on the screen. d Share the queue. 6 Set up your Windows 95, Windows 98, or Windows NT cli- ents in the usual way. (Hint: Click Start, Settings, Printers, Add Printer.) Point-to-point printing (LexIP) Note: These are instructions are for Windows 95/98 workstations. Instructions for Windows NT workstations are on the Drivers, MarkVision and Utilities CD. You can print from any Windows 95, Windows 98, or Windows NT workstation directly to a Lexmark printer located anywhere on the IP network. No server is required. 1 Launch the Drivers, MarkVision and Utilities CD. 2 Choose custom install to add network support. 3 Select TCP/IP. 4 Install the TCP/IP software component on the workstation. 5 Create a printer object on the workstation: a Click Start, Settings, Printers, Add Printer. b When prompted, select Local Printer (not Network). 160 Set up network addresses