Lexmark W810n Setup Guide (2.8 MB) - Page 167
Step 14: Set up network addresses, Printing a network setup
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Step 14: Set up network addresses Note: Make sure you always use the latest version of the Drivers, MarkVision and Utilities CD available to you. Visit the Lexmark Web site for the most recent software and documentation updates. We have provided some helpful hints for setting up your network addresses. If you need additional setup information or troubleshooting tips, refer to the documents on the Drivers, MarkVision and Utilities CD. After launching the CD, click View Documentation and then click MarkNet Print Servers. Printing a network setup page If you used an internal print server to attach your printer to a network, use the printer operator panel to print a network setup page. The network setup page shows the physical address, known as the universally administered address (UAA), of the print server and other important data. To print a network setup page: 1 From the operator panel, press Menu> to enter the menus. 2 Continue to press and release Menu> until you see UTILI- TIES MENU. 3 Press Select. 4 Press Menu> until you see Print Net1 Setup (if the print server is installed in network connector 1) or Print Net2 Setup (if the print server is installed in network connector 2). 5 Press Select again. The network setup page prints. Set up network addresses 155