Lexmark W810n Setup Guide (2.8 MB) - Page 54
Use the green grips to push the, photoconductor cartridge into, the printer as far as it will go.
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
12 Use the green grips to push the photoconductor cartridge into the printer as far as it will go. 42 Set up the printer 13 Close the side door. If the side door is hard to close, remove the photoconductor cartridge and check to make sure you removed the tape and foam plug as directed in step 10 on page 41. Reinstall the photoconductor cartridge, firmly pushing the green grips on the cartridge into the printer as far as they will go.
42
Set up the printer
12
Use the green grips to push the
photoconductor cartridge into
the printer as far as it will go.
13
Close the side door.
If the side door is hard to close,
remove the photoconductor car-
tridge and check to make sure you
removed the tape and foam plug
as directed in step 10 on page 41.
Reinstall the photoconductor car-
tridge, firmly pushing the green
grips on the cartridge into the
printer as far as they will go.