Lexmark W810n Setup Guide (2.8 MB) - Page 72
access cover., Reinstall the system board
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
b Align the slots on the other side of the shield with the tabs on the printer. c Lower the shield into place. d Tighten the two screws on the metal shield. 2 Reinstall the system board access cover. a Insert the tabs on the sys- tem board access cover into the slots on the printer, as shown. b Lower the cover and gently push it down to snap it into place. 60 Install memory and option cards
60
Install memory and option cards
b
Align the slots on the other
side of the shield with the
tabs on the printer.
c
Lower the shield into place.
d
Tighten the two screws on
the metal shield.
2
Reinstall the system board
access cover.
a
Insert the tabs on the sys-
tem board access cover into
the slots on the printer, as
shown.
b
Lower the cover and gently
push it down to
snap
it into
place.