Lexmark W810n Setup Guide (2.8 MB) - Page 159

Refer to the Complete Printer Reference for more information about the Serial Menu and changing these settings. Changing the Paper Type setting It is important to verify that the Paper Type settings are accurate for all the installed paper sources. Refer to the menu settings page you printed. The Paper Type is listed for each of the installed paper sources. Paper Type refers to the type of media loaded in the sources: plain paper, letterhead, transparencies, card stock, a custom media you define, and so on. Since different sources can hold different media, you can customize the Paper Type setting for each source. The printer uses the Paper Type setting to optimize print quality for the media you specified. The Paper Type setting also affects the printer's automatic source selection capability, as well as the tray linking function. (See "Linking trays" on page 149 for more information.) For these reasons, it's important to change the setting each time you change the media in the tray or feeder. Refer to the Complete Printer Reference for detailed information about the paper types supported by each paper source, as well as ways to use the Paper Type setting to make printing more efficient in your work environment. If you need to change a Paper Type setting: 1 From the printer operator panel, press the Menu> button to enter the menus. PAPER MENU appears on the second line of the display. 2 Press the Select button to open the Paper Menu. 3 Press and release Menu> until PAPER TYPE appears on the second line. 4 Press Select. Tray 1 Type appears on the second line of the display. 5 Press Select again if you want to change the Tray 1 Type setting. 6 Press Menu> or