Lexmark W810n Setup Guide (2.8 MB) - Page 55
open the door and firmly push the, green grips on the photoconductor
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Make sure the side door is closed completely. The latch should be all the way down in the locked position. If the side door is hard to close, open the door and firmly push the green grips on the photoconductor cartridge into the printer as far as they will go. Then close the door. Set up the printer 43
43
Set up the printer
Make sure the side door is closed
completely. The latch should be all
the way down in the locked
position.
If the side door is hard to close,
open the door and firmly push the
green grips on the photoconductor
cartridge into the printer as far as
they will go. Then close the door.