Lexmark W810n Setup Guide (2.8 MB) - Page 40
Removing packaging from the trays, through 4 to remove packaging
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Removing packaging from the trays The illustrations in this section show a printer configured with the three standard drawers. Your printer may look different, depending on the options you attached. 1 Pull open tray 1 and remove the foam cushioning, as shown. 2 Close tray 1. 3 Pull open tray 2 and remove the foam cushioning, as shown. 4 Close tray 2. 5 Repeat steps 3 through 4 to remove packaging from tray 3. If you installed an optional 500-sheet drawer, repeat steps 3 through 4 to remove packaging from tray 4. 28 Set up the printer
28
Set up the printer
Removing packaging
from the trays
The illustrations in this section show a
printer configured with the three stan-
dard drawers. Your printer may look
different, depending on the options you
attached.
1
Pull open tray 1 and remove the
foam cushioning, as shown.
2
Close tray 1.
3
Pull open tray 2 and remove the
foam cushioning, as shown.
4
Close tray 2.
5
Repeat steps 3 through 4 to
remove packaging from tray 3.
If you installed an optional
500-sheet drawer, repeat steps 3
through 4 to remove packaging
from tray 4.