Lexmark W810n Setup Guide (2.8 MB) - Page 160
Changing the PaperSizesetting, Verify setup
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
7 When the correct paper type appears on the second line of the display, press Select again to save the type as the default for tray 1. 8 If you need to change the Paper Type setting for another source, press Menu> to scroll to the appropriate source, and then repeat steps 5 through 7. 9 When you are finished changing the Paper Type settings, press the Go button to return the printer to the Ready state. Changing the Paper Size setting Your printer uses the position of the left paper guides in trays 2 and 3 to automatically sense the size of paper loaded in those trays. It can also sense the size of paper in tray 4 if you've installed an optional drawer. You cannot change the Paper Size for these trays from the operator panel menus. Tray 1, however, does not have automatic paper size sensing. If you load any size paper other than the default-letter or A4-you'll have to change the Paper Size setting for tray 1 from the Paper Menu. If you need to change the Paper Size setting for tray 1: 1 From the printer operator panel, press the Menu> button to enter the menus. PAPER MENU appears on the second line of the display. 2 Press the Select button to open the Paper Menu. 3 Press and release Menu> until PAPER SIZE appears on the second line. 4 Press Select. Tray 1 Size appears on the second line of the display. 5 Press Select again if you want to change the Tray 1 Size setting. 6 Press Menu> or