Lexmark W810n Setup Guide (2.8 MB) - Page 21
Set up the optional 2500-sheet drawer, for the designated Lexmark sup
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
You will also need both a Phillips screwdriver and a flathead screwdriver to set up the 2500-sheet drawer. If any items are missing or damaged, refer to the registration card for the designated Lexmark support phone number for your country. 3 Pull open the tray and remove the foam cushioning. The tray is difficult to open, and may require some force. 4 Remove any tape from the drawer. 5 Close the tray. Set up the optional 2500-sheet drawer 9
9
Set up the optional 2500-sheet drawer
You will also need both a Phillips
screwdriver and a flathead screw-
driver to set up the 2500-sheet
drawer.
If any items are missing or dam-
aged, refer to the registration card
for the designated Lexmark sup-
port phone number for your
country.
3
Pull open the tray and remove
the foam cushioning.
The tray is difficult to open, and
may require some force.
4
Remove any tape from the
drawer.
5
Close the tray.