Lexmark W810n Setup Guide (2.8 MB) - Page 68
Attaching an, adapter ribbon cable, One of the 50-hole connectors
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Stripe Attaching an adapter ribbon cable If you bought an adapter ribbon cable for a separate hard disk, follow these instructions to attach the cable to the hard disk. Note: The adapter ribbon cable comes with screws for securing the hard disk to the metal bracket inside the printer. If your hard disk already has a ribbon cable attached, go to "Attaching a hard disk" on page 57. 1 Locate the 47-hole connector on the ribbon cable. One of the 50-hole connectors has three holes plugged. 2 Attach the 47-hole connector to the hard disk connector. When correctly installed, the stripe on the ribbon cable is oriented as shown. 3 Continue with "Attaching a hard disk" on page 57. 56 Install memory and option cards
56
Install memory and option cards
Attaching an
adapter ribbon cable
If you bought an adapter ribbon cable for
a separate hard disk, follow these
instructions to attach the cable to the
hard disk.
Note:
The adapter ribbon cable comes
with screws for securing the hard disk to
the metal bracket inside the printer.
If your hard disk already has a ribbon
cable attached, go to “Attaching a hard
disk” on page 57.
1
Locate the 47-hole connector
on the ribbon cable.
One of the 50-hole connectors
has three holes plugged.
2
Attach the 47-hole connector
to the hard disk connector.
When correctly installed, the
stripe on the ribbon cable is ori-
ented as shown.
3
Continue with “Attaching a hard
disk” on page 57.
Stripe