Lexmark W810n Setup Guide (2.8 MB) - Page 16
Moving the printer, Select a location for your printer, User's Reference
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Moving the printer Front view At some point in the future you may decide to move the printer to a new location. The User's Reference provides details about removing options before moving the printer. If you're going to move the printer, keep the following in mind: • Because the printer is heavy (approximately 44 kg [97 lb] configured with all the standard drawers), two people are required to lift it safely. Always be sure to use the handholds, shown in the figure at left, when you lift the printer. • Remove the photoconductor cartridge before you move the printer. Protect the cartridge from light by covering it with a cloth. • Be sure to plug the printer into a properly grounded outlet in the new location. Rear view • If you need to move the 2500-sheet drawer sometime after setup, you can roll the drawer a short distance. If you need to lift the drawer during the move, use the handles located at each of the four corners of the drawer. 4 Select a location for your printer