Lexmark W810n Setup Guide (2.8 MB) - Page 62
into the connector until the, latches on either end of
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Notch 5 Hold the memory card with the connection points pointing toward the memory connector on the system board, as shown. 6 Align the notches on the bot- tom of the card with the notches on the connector. Notch 7 Push the memory card firmly into the connector until the latches on either end of the connector snap into place. It may require some force to fully seat the card. Make sure each latch fits over the notch on the end of the card, as shown. 8 Repeat steps 4 through 7 to install other memory cards. 50 Install memory and option cards
50
Install memory and option cards
5
Hold the memory card with the
connection points pointing
toward the memory connector
on the system board, as shown.
6
Align the notches on the bot-
tom of the card with the
notches on the connector.
7
Push the memory card firmly
into the connector until the
latches on either end of the
connector
snap
into place.
It may require some force to fully
seat the card.
Make sure each latch fits over the
notch on the end of the card, as
shown.
8
Repeat steps 4 through 7 to
install other memory cards.
Notch
Notch