Lexmark W810n Setup Guide (2.8 MB) - Page 64
Installing option cards, The Optra W810n and W810dn
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Installing option cards Your printer has two connectors that sup- port the following option cards: Note: The Optra W810n and W810dn printer models ship with an Ethernet print server already installed. • Tri-port interface card • Parallel/USB interface card • MarkNet internal print server The Optra W810 has a separate connector for a hard disk. See "Installing a hard disk" on page 55. However, you can use the disk adapter card supported by some other Lexmark laser printers to install a hard disk in one of the option card connectors, if you do not install a disk in the unique disk connector. Install a MarkNet internal print server to add an Ethernet or Token-Ring port for connecting your printer to a local area network (LAN). Install an internal print server with modem support (for sending or receiving fax data) as well as a SCSI port, in addition to the Ethernet port. Install a parallel/USB interface card to add a USB (Universal Serial Bus) port and a second parallel port. Install a tri-port interface card to add LocalTalk, serial, and infrared ports. 52 Install memory and option cards