Lexmark W810n Setup Guide (2.8 MB) - Page 161
Linking trays, Tray 1 = Custom Type 6
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
7 When the correct paper size appears on the second line of the display, press Select again to save the size as the default for tray 1. 8 If you need to change the Paper Size setting for another source, press Menu> to scroll to the appropriate source, and then repeat steps 5 through 7. 9 When you are finished changing the Paper Size settings, press the Go button to return the printer to the Ready state. Linking trays If you load the same paper size and type in more than one tray, the printer automatically links the trays: when one tray is empty, paper feeds from the next linked tray. By linking the trays on the standard Optra W810 printer model, you can effectively create a single paper source that holds up to 1250 sheets. If you installed an optional drawer, you can also link that tray for a total capacity of 1750 sheets or 3750 sheets, depending on the capacity of the optional drawer. When the printer is shipped from the factory, tray linking is not enabled. The factory default Paper Types for the three standard trays are: • Tray 1 = Custom Type 6 • Tray 2 = Plain Paper • Tray 3 = Custom Type 3 To initiate tray linking: 1 Load paper of the same size and type in all the trays you want to link. See page 121 for complete paper loading instructions. 2 Make sure the printer recognizes the same paper size is loaded in each tray: a If you're linking tray 1, make sure you selected the cor- rect size from the Tray 1 Size menu. See page 148 for more information. Verify setup 149