Lexmark W810n Setup Guide (2.8 MB) - Page 36
Close the trays., attach locking clips between
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
1 Pull open trays 2, 3, and 4. Take care not to tip the printer. 2 Attach two locking clips to the left and right sides of the trays, as shown. a Insert the bottom of a clip into the slot on tray 4. b Attach the top of the clip to tray 3 with a screw. c Repeat steps a and b to attach locking clips between trays 2 and 3. 3 Close the trays. 4 Move to the back of the printer. 5 Attach four more locking clips to the back of the printer, as shown. 6 Skip to "Removing packaging from the trays" on page 28. 24 Set up the printer
24
Set up the printer
1
Pull open trays 2, 3, and 4.
Take care not to tip the printer.
2
Attach two locking clips to the
left and right sides of the trays,
as shown.
a
Insert the bottom of a clip
into the slot on tray 4.
b
Attach the top of the clip to
tray 3 with a screw.
c
Repeat steps a and b to
attach locking clips between
trays 2 and 3.
3
Close the trays.
4
Move to the back of the printer.
5
Attach four more locking clips
to the back of the printer, as
shown.
6
Skip to “Removing packaging
from the trays” on page 28.