Lexmark W810n Setup Guide (2.8 MB) - Page 130
Plugging in the finisher
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Plugging in the finisher CAUTION! Make sure the printer is unplugged before continuing. 1 Remove the connector cover on the back of the printer. a Firmly press the cover with your thumb, and push the cover to the left until you hear it click. b Pull the cover off, as shown. 118 Set up the optional finisher
118
Set up the optional finisher
Plugging in the finisher
CAUTION!
Make sure the printer is
unplugged before continuing.
1
Remove the connector cover on
the back of the printer.
a
Firmly press the cover with
your thumb, and push the
cover to the left until you
hear it click.
b
Pull the cover off, as shown.