Lexmark W810n Setup Guide (2.8 MB) - Page 94
Be sure to use both hands, to hold the transport unit while you posi, tion it on the printer.
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Thumbscrew Warning! Be sure to use both hands to hold the transport unit while you position it on the printer. Gear 3 Position the transport unit on top of the support shelf. 4 Open the transport unit cover. 5 Lower the metal shaft on the bottom of the transport unit into the two metal brackets on the mailbox, as shown. Make sure the thumbscrew and gear on the ends of the shaft rest outside the metal brackets. Loosen the thumbscrew, if necessary, to make installation easier. 6 Tighten the thumbscrew to secure the transport unit to the mailbox. 82 Set up the optional mailbox
82
Set up the optional mailbox
Warning!
Be sure to use both hands
to hold the transport unit while you posi-
tion it on the printer.
3
Position the transport unit on
top of the support shelf.
4
Open the transport unit cover.
5
Lower the metal shaft on the
bottom of the transport unit
into the two metal brackets on
the mailbox, as shown.
Make sure the thumbscrew and
gear on the ends of the shaft rest
outside the metal brackets.
Loosen the thumbscrew, if neces-
sary, to make installation easier.
6
Tighten the thumbscrew to
secure the transport unit to the
mailbox.
Gear
Thumb-
screw