Lexmark W810n Setup Guide (2.8 MB) - Page 168
Set up network addresses, cal address for the print server.
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Note: The UAA is preset at the factory. However, you can override it with an optional locally administered address (LAA) if you want some particular physical address for the print server. 6 Look for the UAA under the Network heading on the setup page. The UAA is a 12-digit number. The left column shows the address in MSB form and the right column shows the address in canonical form. 7 Save the network setup page to use later. 8 Turn to the appropriate section for instructions on config- uring your print server. What do I do next? Network environment TCP/IP Novell NetWare AppleTalk OS/2 Warp server Go to page ... 157 162 163 165 156 Set up network addresses
156
Set up network addresses
Note:
The UAA is preset at the
factory. However, you can over-
ride it with an optional locally
administered address (LAA) if
you want some particular physi-
cal address for the print server.
6
Look for the UAA under the Network heading on the setup
page.
The UAA is a 12-digit number. The left column shows the
address in MSB form and the right column shows the address
in canonical form.
7
Save the network setup page to use later.
8
Turn to the appropriate section for instructions on config-
uring your print server.
What do I do next?
Network environment
Go to page …
TCP/IP
157
Novell NetWare
162
AppleTalk
163
OS/2 Warp server
165