Lexmark W810n Setup Guide (2.8 MB) - Page 154
Connecting anexternal faxmodem, Attach cables, before
UPC - 734646367103
View all Lexmark W810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Connecting an external fax modem To printer serial port Power cord Modem cable External class 1 fax modem Phone cord If you installed an optional tri-port adapter in your printer, you can attach an external, class 1 fax modem to the serial port on the adapter. You can then use your printer to receive faxes. To set up the serial port to receive faxes: 1 Make sure the printer and the computer (or other devices you plan to attach) are turned off and the power cords are unplugged. 2 Turn the modem off. 3 Follow the instructions included with the modem to con- nect the modem to the serial port. The modem connects to the printer in the same way it would connect to a computer. Make sure the modem cable has a 25pin connector to attach to the serial connector on the printer. 4 Turn the modem on. You must turn on the modem before you turn on the printer. 5 Turn the printer on. 6 From the printer operator panel: a Press the