Linksys RTP300 User Guide - Page 100
System Configuration Internet Connection Type PAP2T)
UPC - 745883565658
View all Linksys RTP300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
System page Voice tab > System page > System Configuration section Field Restricted Access Domains Enable Web Server Web Server Port Enable Web Admin Access Admin Password User Password Description This feature is used when implementing software customization. Enable/disable web server of the ATA device. This feature should only be used on firmware version 1.0.9 or later. The default is yes. This field is only found in the PAP2T. Port number of the ATA device administration web server. The default is 80. This field is only found in the PAP2T. Lets you enable or disable local access to the administration web server. Select yes or no from the drop-down menu. The default is yes. Password for the administrator. The default is no password. Password for the user. The default is no password. Voice tab > System page > Internet Connection Type section (PAP2T) Field DHCP Static IP NetMask Gateway Description Enable or disable DHCP. The default is yes. Static IP address of ATA device, which takes effect if DHCP is disabled. The default is 0.0.0.0. The NetMask used by ATA device when DHCP is disabled. The default is 255.255.255.0. The default gateway used by ATA device when DHCP is disabled. The default is 0.0.0.0. Voice tab > System page > Optional Network Configuration section (PAP2T) Field Host Name Domain Primary DNS Description The host name of the ATA device. The network domain of the ATA device. DNS server used by ATA device in addition to DHCP supplied DNS servers if DHCP is enabled; when DHCP is disabled, this is the primary DNS server. The default is 0.0.0.0. Linksys ATA Administration Guide 100