Linksys RTP300 User Guide - Page 151

PSTN Line page (AG310 and SPA3102) Field Description VoIP User 1/2/3/4/5/6/7/ The first of 8 user-id's that a VoIP Caller can use to authenticate itself to the 8 Auth ID SPA using the HTTP Digest method (in other words, by embedding an Authorization header in the SIP INVITE message sent to the SPA. If the credentials are missing or incorrect, the SPA will challenge the caller with a 401 response). The VoIP caller whose authentication user-id equals to this ID is referred to VoIP User 1 of this SPA. Note: If the caller specifies an authentication user-id that does not match any of the VoIP User Auth ID's, the INVITE will be rejected with a 403 response. The default is blank. VoIP User 1/2/3/4/5/6/7/ Index of the dial plan in the dial plan pool to be used with VoIP User 1. 8 DP The default is 1. VoIP User 1/2/3/4/5/6/7/ The password to be used with VoIP User 1. The user assumes the identity of 8 Password VoIP User 1 must therefore compute the credentials using this password, or the INVITE will be challenged with a 401 response The default is blank. Voice tab > PSTN Line page > Ring Settings section Field Default Ring Description 1-8, Follow Line Cfg Voice tab > PSTN Line page > FXO (PSTN) Timer Values (sec) section Field Description VoIP Answer Delay Delay in seconds before auto-answering inbound VoIP calls for the FXO account. The range is 0-255. The default is 3. PSTN Answer Delay Delay in seconds before auto-answering inbound PSTN calls after the PSTN starts ringing. The range is 0-255. The default is 16. VoIP PIN Digit Timeout Timeout to wait for the 1st or subsequent PIN digits from a VoIP caller. The range is 0-255. The default is 10. PSTN PIN Digit Timeout Timeout to wait for the 1st or subsequent PIN digits from a PSTN caller. The range is 0-255. The default is 10. Linksys ATA Administration Guide 151