Linksys RTP300 User Guide - Page 50

Configuring Dial Plans Digit Sequence [sequence] . (period) , (comma) ! (exclamation point) *xx S0 or L0 Function Enter characters within square brackets to create a list of accepted key presses. The user can press any one of the keys in the list. • Numeric range For example, you would enter [2-9] to allow the user to press any one digit from 2 through 9. • Numeric range with other characters For example, you would enter [35-8*] to allow the user to press 3, 5, 6, 7, 8, or *. Enter a period for element repetition. The dial plan accepts 0 or more entries of the digit. For example, 01. allows users to enter 0, 01, 011, 0111, and so on. Use this format to indicate that certain dialed digits are replaced by other characters when the sequence is transmitted. The dialed digits can be zero or more characters. EXAMPLE 1: xxxxxxx When the user presses 8 followed by a seven-digit number, the system automatically replaces the dialed 8 with 1650. If the user dials 85550112, the system transmits 16505550112. EXAMPLE 2: xxxxxxxxxx In this example, no digits are replaced. When the user enters a 10-digit string of numbers, the number 1 is added at the beginning of the sequence. If the user dials 9725550112, the system transmits 19725550112 Enter a comma between digits to play an "outside line" dial tone after a user-entered sequence. EXAMPLE: 9, 1xxxxxxxxxx An "outside line" dial tone is sounded after the user presses 9, and the tone continues until the user presses 1. Enter an exclamation point to prohibit a dial sequence pattern. EXAMPLE: 1900xxxxxxx! The system rejects any 11-digit sequence that begins with 1900. Enter an asterisk to allow the user to enter a 2-digit star code. Enter S0 to reduce the short inter-digit timer to 0 seconds, or enter L0 to reduce the long inter-digit timer to 0 seconds. Linksys ATA Administration Guide 50