Linksys RTP300 User Guide - Page 160

PSTN User page (AG310 and SPA3102) Field VMWI Ring Splash Len VMWI Ring Policy Ring On No New VM Description Duration of ring splash when new messages arrive before the VMWI signal is applied (0 - 10.0s). The default is .5. The parameter controls when a ring splash is played when a the VM server sends a SIP NOTIFY message to the ATA device indicating the status of the subscriber's mail box. 3 settings are available: • New VM Available-ring as long as there is 1 or more unread voice mail • New VM Becomes Available-ring when the number of unread voice mail changes from 0 to non-zero • New VM Arrives-ring when the number of unread voice mail increases. The default is New VM Available. If enabled, the ATA device will play a ring splash when the VM server sends SIP NOTIFY message to the ATA device indicating that there are no more unread voice mails. Some equipment requires a short ring to precede the FSK signal to turn off VMWI lamp. The default is no. Voice tab > PSTN User page (AG310 and SPA3102) On the SPA3102 and AG310, you can use the PSTN User page to configure the PSTN user settings. This page includes the following sections: • "PSTN-To-VoIP Selective Call Forward Settings section" section on page 160 • "PSTN-To-VoIP Speed Dial Settings section" section on page 161 • "PSTN Ring Thru Line 1 Distinctive Ring Settings section" section on page 161 • "PSTN Ring Thru Line 1 Ring Settings section" section on page 161 Voice tab > PSTN User page > PSTN-To-VoIP Selective Call Forward Settings section Field Cfwd Sel1-8 Caller Cfwd Sel1-8 Dest Description Eight PSTN Caller Number Patterns to be blocked for VoIP gateway services or forwarded to a certain VoIP number. If the caller is blocked, the SPA will not auto-answers the call. Eight VoIP destinations to forward a PSTN caller matching the Cfwd Sel x Caller parameter. If this entry is blank, the PSTN caller is blocked for VoIP service. Linksys ATA Administration Guide 160