Linksys RTP300 User Guide - Page 123

Line page Feature Invocation Method Select the method you want to use, Default or Sweden default. This field is not found in the PAP2T. The default is Default. More Echo Suppression Enable or disable more echo suppresion. The default is no. This field is not found in the PAP2T. Voice tab > Line page Depending on the ATA device, there may be one or more Line pages (L1, L2, and so on). You can use the Line page to configure the lines for voice service. With some variations, depending on the model, his page includes the following sections: • "Line Enable section" section on page 124 • "Streaming Audio Server (SAS) section" section on page 124 • "NAT Settings section" section on page 125 • "Network Settings section" section on page 125 • "SIP Settings section" section on page 126 • "Call Feature Settings section" section on page 128 • "Proxy and Registration section" section on page 140 • "Subscriber Information section" section on page 130 • "Supplementary Service Subscription section" section on page 130 • "Audio Configuration section" section on page 132 • "VoIP Fallback to PSTN section (SPA3102/AG310)" section on page 133 • "Gateway Accounts section (SPA3102/AG310)" section on page 132 • "Dial Plan section" section on page 133 • "FXS Port Polarity Configuration section" section on page 135 In a configuration profile, the Line parameters must be appended with the appropriate numeral (for example, [1] or [2]) to identify the line to which the setting applies. The number of lines varies with the model of the ATA device. For example, the SPA2102 provides two Line tabs (Line 1 and Line 2), while the SPA8000 provides eight tabs (Line1 through Line 8). The SPA2102 provides one User tab for each Line tab (User 1 and User 2), where many of the line-specific configuration parameters are contained. The SPA8000 does not provide User tabs, but consolidates all the line-specific parameters on the Line tab. Linksys ATA Administration Guide 123