Linksys RTP300 User Guide - Page 84
Without Authentication, Parameter, Description, Values
UPC - 745883565658
View all Linksys RTP300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Configuring the PSTN (FXO) Gateway Call Scenarios NOTE: HTTP Digest Authentication is one way to perform one-stage dialing of a VoIP-To-PSTN call. The other way is with no authentication require. However, if the target number is not specified in the Request-URI or the number matches the account user-id of the PSTN Line, the call reverts to two-stage dialing. Without Authentication This scenario can also be implemented without authentication, using one-stage or two-stage dialing, as in the HTTP Authentication case. The default VoIP caller dial plan is used in this scenario. Authentication is performed when the method is none or when the source IP address of the inbound INVITE matches one of the VoIP Access List patterns. The following table lists the parameters used in VoIP to PSTN Call With and Without Authentication. Parameter VoIP Answer Delay Web Page Description Values PSTN Line A delay in seconds before auto-answering inbound The range is VoIP calls for the FXO account. 0-255. The default is 3. Outside Dial Tone VoIP Caller ID Pattern VoIP Access List Regional Alternative to the Dial Tone. It prompts the user to enter an external phone number, as opposed to an internal extension. It is triggered by a comma encountered in the dial plan. The default is 420@19;10(*/0/1). PSTN Line A comma-separated list of caller number templates such that callers with numbers not matching any of these templates are rejected for PSTN gateway service regardless of the setting of the authentication method. The comparison is applied before the access list is applied. If this parameter is blank (not specified), all callers are considered for PSTN gateway service. For example: 1408*, 1512???1234. Note: '?' matches any single digit; '*' matches any number of digits. The default is blank. PSTN Line A comma-separated list of IP address templates, such that callers with a source IP address matching any of the templates are accepted for PSTN gateway service without further authentication. For example: 192.168.*.*, 66.43.12.1??. The default is blank. Linksys ATA Administration Guide 84