Linksys RTP300 User Guide - Page 167

WAN Type, continued, Fail Pattern

Get Linksys RTP300 - Broadband Router With 2 Phone Ports PDF manuals and user guides
UPC - 745883565658
View all Linksys RTP300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 167 highlights

WAN Type, continued PPP Demand PPTP (Point-to-Point Tunneling Protocol) Parameters wan_ipaddr: WAN IP address wan_netmask: WAN subnet mask wan_gateway: Gateway IP address To configure a PPTP connection: wan_ proto=pptp,ppp_ username=adc,ppp_passwd=def,wan_ipad dr=192.168.0.18,wan_netmask= 255.255.255.0,pptp_server_ip=192. 168.0.251 L2TP (Layer 2 Tunneling Protocol) Parameters l2tp_server_ip: Server IP address ppp_username: User name; enter from 1 to 63 ASCII characters To configure an L2TP connection: wan_proto=l2tp, ppp_username= adc,ppp_passwd= def,l2tp_server_ip= 192.168.0.15 ppp_passwd: Password; enter from 1 to 63 ASCII characters Heartbeat for Telstra Cable Network To configure a Telstra Cable connection: Parameters wan_proto= hb_server_ip: Heartbeat server IP address heartbeat,ppp_username=adc,ppp_ ppp_username: User name; enter from 1 passwd=def,hb_ server_ip= 192.168. 0.16 ppp_passwd: Password; enter from 1 to 63 ASCII characters Fail Pattern: wan_proto=dhcpd wan_proto=static,wan_ ipaddr= 192.168.0.11,wan_netmask= 255. 255.255.128 wan_proto=l2tp,ppp_ passwd=def,l2tp_server_ip=192.168. 0.15 wan_proto=heartbeat, ppp_username=adc,ppp_passwd=def wan_proto=static,wan_ ipaddr=aaabbb,wan_netmask=255. 255.255.128,wan_gateway=192.168.0. 252 ppp_demand,ppp_redia To configure PPP to connect on demand: lperiod ppp_ demand=1, ppp_ ppp_demand: PPP Demand Type; 1 idletime=666 (Connect on Demand) or 0 (Keep Alive) To configure PPP to keep alive: ppp_demand=0,ppp_redial period=77 ppp_redialperiod: Redial period in seconds; numerals from 2 to 180 Linksys ATA Administration Guide 167

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
Linksys ATA Administration Guide
167
WAN Type, continued
PPTP (Point-to-Point Tunneling Protocol)
Parameters
wan_ipaddr: WAN IP address
wan_netmask: WAN subnet mask
wan_gateway: Gateway IP address
To configure a PPTP connection:
<WAN_TYPE> wan_ proto=pptp,ppp_
username=adc,ppp_passwd=def,wan_ipad
dr=192.168.0.18,wan_netmask=
255.255.255.0,pptp_server_ip=192.
168.0.251 </WAN_TYPE>
L2TP (Layer 2 Tunneling Protocol)
Parameters
l2tp_server_ip: Server IP address
ppp_username: User name; enter from 1
to 63 ASCII characters
ppp_passwd: Password; enter from 1 to 63
ASCII characters
To configure an L2TP connection: <WAN_
TYPE>wan_proto=l2tp, ppp_username=
adc,ppp_passwd= def,l2tp_server_ip=
192.168.0.15
</WAN_TYPE>
Heartbeat for Telstra Cable Network
Parameters
hb_server_ip: Heartbeat server IP address
ppp_username: User name; enter from 1
to 63 ASCII characters
ppp_passwd: Password; enter from 1 to 63
ASCII characters
To configure a Telstra Cable connection:
<WAN_TYPE>wan_proto=
heartbeat,ppp_username=adc,ppp_
passwd=def,hb_ server_ip= 192.168. 0.16</
WAN_TYPE>
Fail Pattern
:
<WAN_TYPE>wan_proto=dhcpd
</WAN_TYPE>
<WAN_TYPE>wan_proto=static,wan_
ipaddr= 192.168.0.11,wan_netmask= 255.
255.255.128</WAN_TYPE>
<WAN_TYPE>wan_proto=l2tp,ppp_
passwd=def,l2tp_server_ip=192.168.
0.15 </WAN_TYPE>
<WAN_TYPE>wan_proto=heartbeat,
ppp_username=adc,ppp_passwd=def
</WAN_TYPE>
<WAN_TYPE>wan_proto=static,wan_
ipaddr=aaabbb,wan_netmask=255.
255.255.128,wan_gateway=192.168.0.
252</WAN_TYPE>
PPP Demand
<PPP_DEMAND>
<PPP_DEMAND>ppp_demand,ppp_redia
lperiod</PPP_DEMAND>
ppp_demand: PPP Demand Type; 1
(Connect on Demand) or 0 (Keep Alive)
ppp_idletime: Maximum idle time in
minutes; numerals from 1 to 9999
ppp_redialperiod: Redial period in
seconds; numerals from 2 to 180
To configure PPP to connect on demand:
<PPP_DEMAND>ppp_ demand=1, ppp_
idletime=666</PPP_ DEMAND>
To configure PPP to keep alive: <PPP_
DEMAND>ppp_demand=0,ppp_redial
period=77</PPP_DEMAND>