Linksys RTP300 User Guide - Page 164
To disable SSID-1: <WL_BASIC_SET_1> - locked
UPC - 745883565658
View all Linksys RTP300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Basic Wireless Settings for Primary Network wl_net_mode,wl To enable SSID-1 and specify the SSID _closed,wl_ssid name: wl_net_mode: Network mode; mixed, wl_net_mode =g-only,wl_closed=0, b-only, g-only, or disabled wl_ssid=aaabbb wl_closed: SSID broadcast status; 1 To configure SSID-1 as a Wireless B (disabled) or 0 (enabled) network: wl_net_ wl_ssid: Wireless network name; enter mode=b-only,wl_ssid= aaabbb character not allowed) To disable SSID-1: wl_net_mode=disabled Basic Wireless Settings for Secondary or Guest Network wl1_net_mode_t To enable SSID-2 and specify the SSID mp,wl1_closed,wl1_ssid,ap_isolation name, with guest network: wl1_net_mode_tmp= IMPORTANT: The secondary network 1,wl1_ closed=0,wl1_ssid= cccddd, can be enabled only when when ap_isolation=1 wl_net_mode is enabled for the To disable SSID-2: primary network. wl1_net_mode_tmp=0 1 (enabled), 0 (disabled) To enable SSID-2 guest network: ap_isolation=1 wl1_ssid: Wireless network name; To prevent SSID-2 configuration from enter 1-32 ASCII characters (backslash the device GUI: character not allowed) ctrl_ ssid2=0 ap_isolation: For Internet Only Access (Guest Network); 1 (disabled) or 0 (enabled) ctrl_ssid2: Allows Service Provider to lock SSID2; when enabled, user will not be able to configure SSID2 from the device GUI; 1 (enabled) or 0 (disabled) Wireless Security for wl_security_ To disable Wireless Security 1: = disabled Wireless Security for wl1_security To disable Wireless Security 2: =disabled wl_security_mode2: Security mode for SSID1 wl1_security_mode2: Security mode for SSID2 Acceptable values are WEP, WPA Personal, WPA2 Personal, WPA Enterprise, WPA2 Enterprise, or Disabled Linksys ATA Administration Guide 164