Linksys SPA922 Cisco SPA9000 Voice System Web-UI Based Product Installation an - Page 54
Optional Settings, System Status, WAN Connection Type, Current IP, Current Netmask, Current Gateway
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Connecting the Equipment Installing the SPA9000 4 STEP 6 In the Optional Settings area, enter the Primary DNS for your network. SPA9000 Router tab > Wan Setup page: Optional Settings section NOTE It is recommended to set an IP address that is outside the address range assigned by the DHCP server. For example, if the DHCP server assigns IP addresses in the range from 192.168.1.50 to 192.168.1.254, you should select a static IP address between 192.168.1.2 and 192.168.1.49. STEP 7 Click Submit All Changes. The SPA9000 reboots. STEP 8 To verify your progress, click Router tab > Status. In the System Status section, confirm the WAN Connection Type, Current IP, Current Netmask, Current Gateway, and Primary DNS. SPA9000 Router tab > Status page: System Status section SPA9000 Voice System Installation and Configuration Guide for Web UI 52