Linksys SPA922 Cisco SPA9000 Voice System Web-UI Based Product Installation an - Page 58
Upgrading the Firmware for the IP Phones, Firmware Upgrade Warning
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Connecting the Equipment Installing the IP Phones 4 Upgrading the Firmware for the IP Phones In this procedure, you install the most recent firmware files for the phones. NOTE You need to repeat this procedure to upgrade each phone individually. STEP 1 To find the IP address of the phone, complete the following tasks: a. Press the Setup button on the phone keypad. b. Scroll down to 9 - Network, and then press the Select soft key. c. Make a note of the Current IP address that is displayed on the phone. STEP 2 Use the administration computer to install the latest firmware for this model of IP phone: a. Extract the Zip file, and then run the executable file to upgrade the firmware. b. When the Firmware Upgrade Warning window appears, click Continue. c. In the next window that appears, enter the IP address of the phone, and then click OK. SPA9000 Voice System Installation and Configuration Guide for Web UI 56