Linksys SPA922 Cisco SPA9000 Voice System Web-UI Based Product Installation an - Page 76
Configuring SPA9000 Connectivity for PSTN Access Only, STEP 1
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Configuring Phone Service and Voice Mail Configuring the SPA9000 5 Configuring SPA9000 Connectivity for PSTN Access Only You can configure the SPA9000 so that the users can place and receive calls through PSTN lines that are connected to a SPA400, or to multiple SPA400 devices. Set up a line interface for each SPA400 that you connect. NOTE This step is required if you want to configure another SPA400 for PSTN access only. STEP 1 Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin Login and then click Advanced. STEP 2 Click Voice tab > Line 3. NOTE Any line can be used; however, for consistency throughout this Install Guide, Line 1 is used for ITSP service, Line 2 is used for the SPA400 that has voice mail service, and Line 3 is used for a second SPA400 that has PSTN access. STEP 3 Enter the following information about the SPA400: • User ID: 9000 This ID corresponds to the User ID that you entered on the SPA400 configuration page. They must match exactly. • Proxy: Enter the IP address of the SPA400. SPA9000 Voice System Installation and Configuration Guide for Web UI 74