Linksys SPA922 Cisco SPA9000 Voice System Web-UI Based Product Installation an - Page 95
Typical Outbound Call Routing Examples, SYNTAX, EXAMPLE 1, Submit All Changes, ITSP Only
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Configuring Phone Service and Voice Mail Outbound Call Routing 5 SYNTAX: (xx.) EXAMPLE 1: A user presses 9 to access Line 1. Call Routing Rule: (9xx.) Line 1 Dial Plan: (xx.) EXAMPLE 2: A user presses 9 to access Line 1 and presses 8 to access Line 2. Call Routing Rule: (9xx. | 8xx.) Line 1 Dial Plan: (xx.) Line 2 Dial Plan: (xx.) EXAMPLE 3: A user presses 9 to access Line 1 and presses 8 to access Line 2. Line 2 is used as backup of Line 1. Call Routing Rule: (9xx. | 8xx.) Line 1 Dial Plan: (xx.) Line 2 Dial Plan: (xx. | xx.) STEP 5 Repeat the previous step to configure each active line. STEP 6 Click Submit All Changes. STEP 7 To verify call routing rule, place an outbound call to an external cell phone or other phone with caller ID, and confirm that the specified line was used for the call. STEP 8 To verify that a backup line is working, disable the primary line first, and then place a call to confirm that the call is transmitted through the backup line. Typical Outbound Call Routing Examples The following examples show how you can accomplish various call routing goals by editing the call routing rule and the dial plans. • ITSP Only: Line 1 is configured for ITSP service. The user (in USA) would like to press 9 to dial outbound (default configuration). • Call Routing Rule: (9xx.) • Phone dial plan (US): (9,[3469]11S0 | 9,[2-9]xxxxxx | 9,[2-9]xxxxxxxxxS0 | 9,1[2-9]xxxxxxxxxS0 | 9,011xx. | 9,xx. | [1-8]xx) • Line 1 Dial plan: (xx.) SPA9000 Voice System Installation and Configuration Guide for Web UI 93