Linksys SPA922 Cisco SPA9000 Voice System Web-UI Based Product Installation an - Page 64
Fixed IP address, IP Subnet Mask, Gateway IP Address, Primary DNS, Secondary DNS, Time Zone
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Connecting the Equipment Installing the SPA400 4 STEP 4 Enter the following settings: Network Setup section: • Fixed IP address: Click the radio button, and then enter a valid IP address. NOTE To avoid addressing conflicts, enter an IP address that is outside the range of addresses that are automatically assigned by your DHCP server. • IP Subnet Mask: Enter the subnet mask for the subnetwork that the SPA400 is on. • Gateway IP Address: Enter the IP address of the router for this subnetwork. Domain Name Server (DNS) Address section: • Primary DNS: Enter the IP address of the primary DNS server. • Secondary DNS: Enter the IP address of the secondary DNS server. NTP section: • NTP: Enter a fully qualified name of a Network Time Protocol server, such as time.nist.gov. • Time Zone: Select the time zone for your region. STEP 5 Click Save Settings. The SPA400 will reboot. To reconnect to the web administration server, enter the new IP address for the SPA400 in the browser Address bar. SPA9000 Voice System Installation and Configuration Guide for Web UI 62