Linksys SPA922 Cisco SPA9000 Voice System Web-UI Based Product Installation an - Page 71
Submit All Changes, Voice tab > Info, The SPA9000 reboots.
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Configuring Phone Service and Voice Mail Configuring the SPA9000 Use the following illustration as a guide. SPA9000 Voice tab > Line 1 page 5 • SIP Port: You can keep the default value of 5060 for Line 1. Each line must have a unique SIP port. • Contact List: Leave the default value, aa, for the Auto Attendant. Later, you can make changes. Using this basic setting at this point simplifies your testing and verification of the configuration. STEP 4 Click Submit All Changes. The SPA9000 reboots. STEP 5 To verify your progress, perform the following tasks: • After the devices reboot, click Voice tab > Info. Scroll down to the Line 1 Status section. Verify that the line is registered. You may need to refresh the browser screen to see the new status. SPA9000 Voice tab > Info page: Line 1 Status section • Use an external phone, such as a cell phone, to place an inbound call to the telephone number that was assigned by your ITSP. Assuming that you have left the default settings in place, the Auto Attendant answers the call. You can then dial an extension number to verify that the call rings to the station. SPA9000 Voice System Installation and Configuration Guide for Web UI 69