Linksys SPA922 Cisco SPA9000 Voice System Web-UI Based Product Installation an - Page 82
Reboot OK. Go to Setup Registered, Save Settings, Administration tab > Reboot, Restart
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Configuring Phone Service and Voice Mail Configuring the SPA400 Use the following illustration as a guide. SPA400 Setup tab > Voice page 5 STEP 6 Click Save Settings at the bottom of the page. STEP 7 To restart the SPA400, complete the following steps: a. Click Administration tab > Reboot. b. Click Restart System. c. When the confirmation message appears, click OK. The SPA400 reboots. d. When the Reboot OK. Go to Setup Page? message appears, click OK and wait for 60 seconds (the time required for the SPA9000 to re-register with SPA400). STEP 8 To verify your progress, perform the following tasks: a. Click the Status tab, and confirm that the SIP registration status is Registered. SPA400 Status tab SPA9000 Voice System Installation and Configuration Guide for Web UI 80