Linksys SPA922 Cisco SPA9000 Voice System Web-UI Based Product Installation an - Page 79
SPA9000 Voice System, Administration Guide, Setup tab > Basic Setup
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Configuring Phone Service and Voice Mail Configuring the SPA400 5 NOTE The user name must be entered exactly as shown: Admin. For information about managing system access, refer to the Cisco SPA9000 Voice System Administration Guide. STEP 3 Click Setup tab > Basic Setup. STEP 4 Enter the following settings: Network Setup section: • Fixed IP address: Click the radio button, and then enter a valid IP address. NOTE To avoid addressing conflicts, enter an IP address that is outside the range of addresses that are automatically assigned by your DHCP server. • IP Subnet Mask: Enter the subnet mask for the subnetwork that the SPA400 is on. • Gateway IP Address: Enter the IP address of the router for this subnetwork. Domain Name Server (DNS) Address section: • Primary DNS: Enter the IP address of the primary DNS server. • Secondary DNS: Enter the IP address of the secondary DNS server. NTP section: • NTP: Enter a fully qualified name of a Network Time Protocol server, such as time.nist.gov. • Time Zone: Select the time zone for your region. SPA9000 Voice System Installation and Configuration Guide for Web UI 77