Linksys SPA922 Cisco SPA9000 Voice System Web-UI Based Product Installation an - Page 83
Battery Level, Line 2 Status, Registered, Configuring the, Voice Mail Server and Voice Mail Users
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Configuring Phone Service and Voice Mail Configuring the SPA400 5 b. If you connected PSTN lines to the ports on the SPA400, confirm that you can place an external call to the phone number that is associated with the PSTN line. The Auto Attendant answers the call. You can then dial one of the extension numbers to verify that the call rings to the station. Also verify that a voltage value appears under Battery Level. c. Start Internet Explorer, and then enter the IP address of the SPA9000. Log on as Admin, and then click Voice> Info. Verify that the Line 2 Status is Registered. You may need to refresh the browser screen to see the new status. STEP 9 Proceed as needed: • If you are using the SPA400 for voice mail service, continue to "Configuring the Voice Mail Server and Voice Mail Users," on page 82. • If you are not using the SPA400 for voice mail service, you have finished configuring your SPA400. SPA9000 Voice System Installation and Configuration Guide for Web UI 81