Linksys SPA922 Cisco SPA9000 Voice System Web-UI Based Product Installation an - Page 88
Configuring the Voice Mail Server and, Voice Mail Users, on Call Feature Settings
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Configuring Phone Service and Voice Mail Setting Up Each Station 5 b. Under General, enter a Station Name. Telephone Configuration > Phone page: General section NOTE This setting assists you in managing the phones. STEP 5 To configure voice mail service with the SPA400 voice mail server, complete the following tasks: a. Click the Ext 1 tab. b. Under Call Feature Settings, enter the Mailbox ID in the following format: Example: 2105 • lineN: The SPA9000 line (1, 2, 3, or 4) that is configured with the voice mail settings In the example, 2 is the first digit in the Mailbox ID because you previously configured Line_2 with the settings for the SPA400 voice mail server. By comparison, if you had configured Line 3 for the SPA400 voice mail server, you would enter_3 as the first number in the Mailbox ID. • mailbox: The voice mailbox number for this station, as configured on the SPA400 Voice Mail Users page (see "Configuring the Voice Mail Server and Voice Mail Users," on page 82.) In the example, 105 is the final set of digits in the Mailbox ID because this station retrieves voice mail from mailbox 105. Enter the appropriate mailbox number for the station that you are configuring. Telephone Configuration > Ext 1 page: Call Feature Settings section SPA9000 Voice System Installation and Configuration Guide for Web UI 86