Linksys SPA922 Cisco SPA9000 Voice System Web-UI Based Product Installation an - Page 70

Configuring Phone Service and Voice Mail Configuring the SPA9000 5 Configuring Internet Phone Service (ITSP) on the SPA9000 If you are using Internet phone service, you need to configure the SPA9000 with the account information. In this procedure, you use the SPA9000 web configuration utility to enter the logon information and the address of the proxy server. After you complete these steps, you will verify that the phone service is registered and that you can place and receive calls. NOTE This procedure is required if you are using Internet phone service. If you are using PSTN access only (via the SPA400), go to the next procedure, ""Configuring SPA9000 Connectivity with the SPA400 for PSTN and Voice Mail Service," on page 70. STEP 1 Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin Login and then click Advanced. STEP 2 Click Voice tab > Line 1. NOTE Any line can be used for ITSP service. However, for simplicity and consistency throughout this Install Guide, Line 1 is used for this purpose. STEP 3 Enter the account information for your ITSP account: • User ID: The account number or logon name for your ITSP account (often the same as the phone number) • Password: The password for your ITSP account • Proxy: The proxy server for your ITSP account SPA9000 Voice System Installation and Configuration Guide for Web UI 68