Linksys SPA922 Cisco SPA9000 Voice System Web-UI Based Product Installation an - Page 62
SLM224P switch., Configuring Phone, Service and Voice Mail.
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Connecting the Equipment Installing the SPA400 4 STEP 1 Connect the provided Ethernet network cable to the ETHERNET port on the SPA400, and then connect the other end of the cable to an Ethernet port on the SLM224P switch. STEP 2 If you are using the SPA400 for PSTN access, connect an RJ11 telephone cable to one of the line ports on the SPA400, and then connect the other end of the cable to the RJ11 wall outlet for the telephone service. STEP 3 If you are using the SPA400 as a voice mail server, insert the provided USB 1.1 voice mail module into the USB port. NOTE IMPORTANT: For optimum voice mail performance, a SPA400 should be dedicated to the voice mail application when either of the following conditions is met: 1. More than 2 FXO connections are required OR 2. More than 2 users commonly access voice mail at the same time. STEP 4 Connect the provided power adapter to the POWER port on the SPA400, and then connect it to an electrical outlet. NOTE If you would like to provide SPA400 with Power over Ethernet support, connect a POES5 Power over Ethernet adapter. STEP 5 To verify your progress, confirm that the Power LED on the SPA400 flashes and then shines steady green. The Status LED remains flashing until the SPA400 is registered to the SPA9000. NOTE You will learn how to configure the SPA400 in Chapter 5, "Configuring Phone Service and Voice Mail." SPA9000 Voice System Installation and Configuration Guide for Web UI 60