Linksys SPA922 Cisco SPA9000 Voice System Web-UI Based Product Installation an - Page 65
Upgrading the Firmware for the SPA400
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Connecting the Equipment Installing the SPA400 4 Upgrading the Firmware for the SPA400 In this procedure, you install any firmware updates that you downloaded in the Preparation phase. NOTE You need to repeat this procedure to upgrade each SPA400 individually. STEP 1 Start Internet Explorer, and enter the IP address of the SPA400. NOTE By default, the SPA400 is configured to obtain an IP Address via DHCP. You can check the obtained IP address on the router DHCP server's client list. STEP 2 When the password prompt appears, enter the default user name, Admin, with no password. Then click OK. NOTE The user name must be entered exactly as shown: Admin. For information about managing system access, refer to the Cisco SPA9000 Voice System Administration Guide. STEP 3 Click Administration tab > Firmware Upgrade. STEP 4 Click Browse. SPA400 Administration tab > Firmware Upgrade page STEP 5 Find the binary (.bin file) that you extracted to your Desktop, and click Open. SPA9000 Voice System Installation and Configuration Guide for Web UI 63