Linksys SPA922 Cisco SPA9000 Voice System Web-UI Based Product Installation an - Page 68
Configuring the SPA9000, Configuring General Settings for SPA9000
UPC - 745883570836
View all Linksys SPA922 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Configuring Phone Service and Voice Mail Configuring the SPA9000 5 Configuring the SPA9000 On the SPA9000, you configure a "line" for ITSP phone service and another "line" for SPA400 services such as PSTN access and voice mail. • "Configuring General Settings for SPA9000," on page 66 • "Configuring Internet Phone Service (ITSP) on the SPA9000," on page 68 • "Configuring SPA9000 Connectivity with the SPA400 for PSTN and Voice Mail Service," on page 70 • "Configuring SPA9000 Connectivity for PSTN Access Only," on page 74 Configuring General Settings for SPA9000 There are several settings that are recommended to ensure good performance on your voice network. Complete this procedure before performing any other configuration tasks. STEP 1 Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin Login and then click Advanced. STEP 2 Click Voice tab > SIP. STEP 3 Enter the following settings: • Under PBX Parameters, set Force Media Proxy to Yes. This setting ensures that the voice path goes through the SPA9000, which acts as a media relay. SPA9000 Voice tab> SIP page: PBX Parameters section SPA9000 Voice System Installation and Configuration Guide for Web UI 66